8:07 pm - Tuesday June 13, 2017

Door Styles Latest Doors Styles for your Home

Frame the Sliding Closet Doors for Bedrooms Ideas

Sunday, 22 July 2012, 3:53 | DOORS TIPS | 0 Comment | 1648 Views
by Hank

Frame the Sliding Closet Doors for Bedrooms Ideas

Sliding Doors Closet provide many benefits in your bedroom. they work by shifting to open or close the door. This provides efficient room door to your bedroom. However, when you are going to need repair or sliding door size, so you can determine which Frame the Sliding Closet Doors for Bedrooms.

  • Measure the dimensions of the doors with the track system. The package should say, has door frame, but it is how big a good idea to check before you create the door. Measure the size of the image of the wall construction for the doors. You need the length of the wall and the distance between the floor and the ceiling, and then subtract 4 inches for parts of backbone.
  • Cut 2 – by – 4S with a circular saw for frame parts. You will need two pieces that are the length of the wall at the top and bottom edges of the image of the wall. So that all 16 inch to the length of the wall except are arranged, need enough pieces Stud where are sliding doors. Need a piece of the length of the room, for the design of the door, and you will need enough 2-by-4 s, which measures the difference between the upper in the doorway and the ceiling minus 4 inch spaced 16 inches along the door frame.
  • Build the wall frame by setting up long pieces, which are top and bottom edges of the image of the wall and two plugs a square to make. With 4 inch wood go in the hunt against the floor and the ceiling when filling out of the frame. Use two nails from each end of the frame and nail posts held. Make sure that the corners are square and then the remaining Poland square 16-inch and a place where let go nail the doors. Nail two poles at each end of the frame of the door. Nail the piece for the door in place to the correct height frame, then pieces of short pimples of the nail in place along the upper part of the door frame Cabinet. It is available in the frame of the door.
  • To put on the wall. He nails in the floor and the ceiling on each side of each Stud bolt. If you add part of the wall to an existing wall, need a stud farm, where you can search with a Stud Finder. Nail every 18 inches from the floor-to-ceiling space. Use a hand saw to cut the piece of the wall image where the doors of the cabinets go, after you have nailed part square on the wall. Paint the door frame.
  • Installation of tracks for sliding doors by fitting the band top and bottom band place. Measure and mark where you have to screw you the framework, so that the tracks of the line. Place the doors within the track, when you have finished walls, to the Cabinet.
Tagged with: ,

Leave a reply